Changing a shower mixer

The story goes like this. As I was turning off the water after showering, the handle broke. There wasn't even any warning. The handle just came apart.

Description of the Issue

Original shower mixer was connected to a rain shower.

Rain shower assembly

Finding the answer

I called 1 week before Chinese New Year and the plumber said that he could not come until after Chinese New Year. I initially though this was a big project but on closer inspection and analysis, its not that difficult.

Thanks to a helpful hardware shop assistant, I decided to do away with the rain shower, (used it only less than 10 times in the last 4 years) and just replace with a normal hand shower.

The answer

This cost only $69.90. I did not even want to bargain with the shop. I went round searching for a full rain shower set and the shops quoted me $200 over dollars for the whole set.

I removed the 2 nuts holding the old mixer with a adjustable spanner.

The size between the 2 nuts were quite standard at 150mm.

Then installed the new shower mixer. Just reverse the process. I did go like 10 rounds of white tape over the thread of the pipe opening before I screwed on the new shower mixer. 

Use a piece of cloth to cover the nuts when you tighten them to prevent scratching the surface

Then I bought a shower spray holder and installed it by drilling 2 holed on the wall tiles. The wall plugs 5.5mm. The finished product looked like this.

Completed assembly all for $92....

Not that difficult after all and I saved myself about $50 for this job. It was done in 1 hour as I was taking it slow with my son helping me...

Now that I am moving to Malaysia, I do forsee more opportunities for DIY around the house.

Import Permit for Pets to Malaysia

After staying for 10 years in Singapore, its time to move. The next destination is Malaysia.

One of the items that we have on our minds is....how to bring our lovely Chihuahua along with us to Malaysia? A search in Google revealed similar bloggers who have done so from US and Singapore.

We thronged through many blogs, websites to find out the process. Perhaps in this short blog, I can share the simple steps and even provide my assistance (Going to the DVS office to apply for the import permit in Malaysia) to anyone who needs help.

Steps:

1) Get ready your pet's vaccination certification in (the country of export) which is Singapore.

2) Get ready your pet's rabies vaccination certificate in Singapore

3) Go to the Department of Veterinary Services in Malaysia to apply for the IMPORT PERMIT. One thing to note, the permit is valid for 30 days.....so please time your departure.
i) supply your name in your IC or Passport
ii) supply your address in Malaysia
iii) provide the date of import for your pet

See picture below.

4) In the country of export i.e.Singapore, apply for the EXPORT permit. You do this with AVA in Singapore. This can be done online for $50 dollars using your Singpass.

5) Apply for a certified veterinary health certificate for pet from the government veterinarian of the origin country. In Singapore, I went to the AVA. This must be done within 7 days of export.
i) You have to visit the VET.
ii) Then apply online using your Singpass at AVA website.
iii) You must make a trip to AVA to show them the original documents.
iv) 2 days later, go to AVA and get the "original" certified veterinary health certificate from AVA. This is a watermarked document. It takes 2 days to process.

6) With all your documentation, proceed to Malaysia....we decided to drive to using the TUAS checkpoint.

All in all, its not that difficult. I find that the troublesome part was going to Malaysia to get the import permit myself. This is where I can offer my services. If you need someone in Malaysia to help you get the import permit and courier it to you. I can offer my "runner" services. Just drop me an email : heartlanderdiy@gmail.com

After going thru this process, I would appreciate if someone had offered such services online .....I got a quote from a pet importer. It was SGD$1280 to import my pet to Malaysia from Singapore.

Our lovely Chihuahua Chloe....

A new and exciting door opened in 2013

December 2012 came and now its 2013 January.

That's it, the induction hob that was installed is finally dead,,,,,and I mean dead. There was a short resurrection in August in my last post.

This time in December I called the Service Centre, MAYER Singapore, to request for a technician to come take a look. As it happened before Christmas eve, the earliest they could come was Jan 3 2013.....but my wife had a Christmas dinner to cook.....what should we do.....

Never fear, Jesus is every so good. A call to my sister and she gladly gave me her portable induction cooker....It's a Taiyo....cost about $160 and it could do exactly what my thousand over dollars induction hob could do. Best of all, it's portable and we even had steamboat dinner using it.

Wow.....why didn't I buy this instead????? A consolation was 4 years ago, the technology of induction hob was no that advanced (consoling myself). Nowadays, the technology is better.

Anyway, the technician came. A Chinese "uncle"....he took a look....commented....".i think you better buy new one.....there are 2 curcuit board, each one cost $350 and after you change that, I cannot guarantee that the others are not spoilt......so you think properly ok??? Better buy a gas stove, only hundred over dollars."

Hmmm....his observation and analysis was that the installation process was wrong. The carpenter should have left more space at the front of the induction hob to allow the air to escape from the unit. The hold cut in the worktop was too small......

I wanted to argue with the uncle that the hold was cut according to the user manual.....why didn't the user manual say to cut bigger hold and leave space in front of the hob????

Anyway, it's wise to show grace in my words and season it with salt....I smiled and asked the uncle how much was the trip to my place....I paid him $60 for 10 minutes of observation.

In conclusion.....induction hob is good to use. Perhaps the manufacturers can indicate their installation guide to leave space in front of the hob for air to circulate. 

Now my next task is to buy a gas hob. Its off to Harvey Norman.